DevilsOwn Progressive Alcohol Injection kit. This is our most popular kit we offer. This is for the person who wants to have full control of there Alcohol/water injection needs.

DevilsOwn progressive water alcohol injection kits main function is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Cool the air with the DevilsOwn alcohol water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines. Methanol with its 116 octane and high flash point and specific gravity further reduce the chances of detonation.

Benefits of Progressive Injection Kit   Allows you to run safely more boost and/or more timing Reduce the intake charge temperature up to 70F, results in a denser more powerful air/fuel charge Perfect for cars with thermal problems and prior tuned cars No loss of boost as with a intercooler No wear issues only clean combustion chambers Reduce the specific fuel consumption 1 years full warranty

Progressive Controller dvl-2001 The electronic progressive controller represents the latest technology in Water/Methanol system control. The dvl-2001 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire.   Shurflo Alcohol/Water Pump Long lifetime, 10+ Millions cycles No lost in pressure even with high volumes Dry run up to 1 hour Methanol-compatible EPDM Diaphragm High Volume pump 150PSI

Common Questions about our Universal Progressive Injection Kit.

What size nozzle do i need?

Our kits comes with the 2 most popular nozzles sizes 3gph, 7gph outside mount nozzles . There are many factors effecting nozzle size such as engine size power adder, Intercooled or non intercooled and level of boost you are running. What works for 1 car is not always best for another.

What all controller do i need?

All map sensor read from 0-5v. They just each have there own scale. Our controllers have 2 different user selectable scales built into them. 2 Bar or 3Bar which perfectly matches gm 2 & 3 bar map sensors. If you have a map sensor that is not either a gm 2 or 3 bar then you will want our voltage controller. This is the most compatible of our controllers and works on most all 0-5v source including maff, tps, etc.

What all comes with this kit?

This kit assumes you are mounting this in your engine bay and are using your factory washer tank or have provided your own tank. So it comes with 15ft of tubing, More can be purchased if needed . This kit comes with hardware, electrical connectors, and fittings need to install this kit