Devilsown Alcohol Injection kit customized for Evolution VIII. This kit utilizes a gm 3 bar map sensor that gives our progressive controller 0-5v source. This is for the person who wants to have full control of there Alcohol/water injection needs. DevilsOwn Progressive water alcohol injection kits main function is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by a turbo. Compressed air is heated air which causes power robbing and engine destroying detonation. Cool the air with the DevilsOwn alcohol water injection kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines. Methanol with its 116 octane and high flash point and specific gravity further reduce the chances of detonation.
Common Questions about our Evolution VIII Injection Kit. What size nozzle do i need?Our kits comes with the 2 most common sizes of nozzles for an Evolution VIII. There are many factors effecting nozzle size such as engine size power adder, Intercooled or non intercooled and level of boost you are running. What works for 1 car is not always best for another. What all comes with this kit?Comes with 2 nozzles, nickel plated brass check valve, controller, water pump. This kit assumes you are mounting this in your engine bay and are using your factory washer tank or have provided your own tank. So it comes with 15ft of tubing, More can be purchased if needed . This kit comes with hardware, electrical connectors, and fittings need to install this kit . Gm 3 bar map sensor/pigtail and fittings need to install this kit. Our progressive kit will need nothing to completely install this kit.  |
