Devilsown Alcohol water Injection just for Dodge Srt-4. This is for the person who wants to have full control of there Alcohol/water injection needs and is an owner of a dodge srt-4.

DevilsOwn Progressive water alcohol injection kits main function is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Compressed air is heated air which causes power robbing and engine destroying detonation.

Cool the air with the DevilsOwn alcohol water injection dodge srt-4 kit! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines. Methanol " prefered alcohol" with its 116 octane and high flash point and specific gravity further reduce the chances of detonation.

Benefits of Dodge Srt-4 Injection   Allows you to run safely more boost and/or more timing Reduce the intake charge temperature up to 70F, results in a denser more powerful air/fuel charge Perfect for cars with thermal problems and prior tuned cars No loss of boost as with a intercooler No wear issues only clean combustion chambers Reduce the specific fuel consumption 1 years full warranty

Progressive Controller dvl-2001 The electronic progressive controller represents the latest technology in Water/Methanol system control. The dvl-2001 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire.   Shurflo Alcohol/Water Pump Long lifetime, 10+ Millions cycles No lost in pressure even with high volumes Dry run up to 1 hour Methanol-compatible EPDM Diaphragm High Volume pump 150PSI

Common Questions about our Dodge Srt-4 water alcohol Injection

What size nozzle do i need?

Our kits comes with the 2 most common sizes of nozzles for an srt-4. There are many factors effecting nozzle size such as engine size power adder, Intercooled or non intercooled and level of boost you are running. What works for 1 car is not always best for another.

Ok, What is the differnce, base, 2bar, 3bar progrerssive?

Our base kit is an off/on type setup. Our progressive kit hooks up to your map sensor in your car. Stage 0-1 are 2 bar and Stage 2-3 are usually 3 bar. Our progressive kit allows you to turn on kit at a lower boost pressure, and start the kit at an 15% duty cycle and have it ramp up to the max setting of the controller.

What all comes with this kit?

This kit assumes you are mounting this in your engine bay and are using your factory washer tank or have provided your own tank. So it comes with 15ft of tubing, More can be purchased if needed . This kit comes with hardware, electrical connectors, and fittings need to install this kit minus vacuum hose and a vacuum tee needed to tie into your existing system when installing a base kit. This can be picked up at any local hardware store for less than 5 dollars. We have no way of knowing what size you will need. Our progressive kit will need nothing to completely install this kit.